PDMS COMANDO AWANG-AWANG

Menyambut hari ulang tahun Pujangga Piping Blog yang ke 2 tahun.

(14 February 2010 - 14 February 2012)

PDMS QUERY COMMANDS

Q ADEG (DRAFT)                              = GIVES THE C/VIEW ANGLE (IE 90 DEG)

Q ANGLE (HVAC)                             = GIVES THE CE ANGLE

Q ATEX (DRAFT)                              = GIVES THE SLAB TEXT ATTIBUTES

Q ATT                                                 = GIVES THE ATTRIBUTES

Q BANG                                             = GIVES THE CE BETA ANGLE

Q BORE (PIPING)                              = GIVES THE PIPPE INSIDE DIA.

Q BSRF (DRAFT)                               = GIVES THE TEXT / GLAB ATTRIBUTES

Q BTEX (DRAFT)                              = GIVES THE TEXT /GLAB ATTRIBUTES

Q CHEI (DRAFT)                               = GIVES THE TEXT CHARACTER HEIGHT

Q CLL (PIPING)                                 = GIVES THE PIPE BRANCH LENGTH

Q COL ACT                                       = GIVES THE CURRENT ACTIVE COLOUR

Q COL AIDS                                      = GIVES THE CURRENT AID LINE COLOUR

Q COL CE                                          = GIVES THE CURRENT ATTRIBUTED COLOUR

Q COL VIS                                         = GIVES THE CURRENT VISIBLE COLOUR

Q COL 4 (ECT)                                  = GIVES THE ATTRIBUTED COLOUR (YELLOW)

Q CREF                                              = GIVES THE CONNECTION REFERENCE

Q CUT                                                = GIVES THE CE CUT LENGTH

 Q DDNAME (DRAFT)                      = GIVES THE OWNERS NAMES

Q DER LEN                                        = GIVES THE OWNERS NAME

Q DESC                                              = GIVES THE CE DESCRIPTION

Q DESP                                               = GIVES THE CE DESPERAMETERS

Q DIR (DRAFT)                                  = GIVES THE C/VIEW DIRECTION (IE N)

Q DIR PIN1                                        = GIVES THE DIRECTION OF PIN1

Q DISPLAY                                        = GIVES THE TOLERANCE & REPRES LEVELS

Q DMTXT (DRAFT)                           = GIVES THE DIM TEXT ATRIBUTES

Q DNST                                              = GIVES THE CE DENSITY

Q DPOS (DRAFT)                              = GIVES THE LDIM POSITION ON SHEET

Q DRNE                                              = GIVES THE END CUT-PLANE DIRECTION

Q DRNS                                              = GIVES THE START CUT-PLANE DIRECTION

Q DTER (DRAFT)                              = GIVES THE LAYER/LDIM TERM’TR DEFAULT

Q :DTYPE                                           = GIVES THE FRMW STILE TYPE (is STLS)

Q E                                                      = GIVES THE CE EAST CO-ORDINATE

Q ELEM                                              = GIVES THE CE ELEMENT NAME

Q FRAD                                              = GIVES THE FLOO/PAVE RADIUS ie 100mm OR THE  

                                                              NXTR /VERT RADIUS ie 100 mm.

Q FPT (DRAFT)                                 = GIVES THE STRA FROM POINT CO-ORDS

Q FUNC                                             = GIVES THE CE FUNCTION

Q GCOF                                            = GIVES THE CE GROSS C OF G

Q GRADE                                           = GIVES THE CE MATERIAL GRADE

Q GTYP                                              = GIVES THE GENERIC TYPE ie OD , HP, TG

Q GWEI                                              = GIVES THE CE GROSS WEIGHT

Q HEI                                                  = GIVES THE CE (PLOO LVL) PLT THK

Q HSTU (ONLY FOR BRANCH)      = GIVES THE  HEAD SPE FN TUBE

Q HH (PIPE SUPPT)                          = GIVES THE CE HANGER HEAD CO-ORDINATES

Q HPOS (PIPING)                              = GIVES THE CE PIPE HEAD CO-ORDINATES

Q HT (PIPING)                                   = GIVES THE CE HANGER TAIL CO-ORDS

Q IDP @ WRT/*                                 = GIVES THE CE P POINT CO-ORDINATES

Q IDPL@                                            = GIVES THE PLINE NAME USING CURSOR

Q ISPEC (PIPING)                             = GIVES THE CE (PIPE) INSULATION

Q ITLE                                                = GIVES LENGTH OF IMPLIED TUBE

Q ITLE OF IA TUB                            = GIVES PIPE SPOOL LENGTH ON ARRIVAL SIDE

Q ITLE OF IL TUB                             = GIVES PIPE SPOOL LENGTH ON LEAVE SIDE

Q JLIN                                                = GIVES THE CE JOINT LINE

Q JUSL                                               = GIVES THECE JUSTIFICATION LINE

Q LASTMOD                                     = GIVES THE DATE STRU WAS LAST MODIFIED

Q LEN (DRAFT)                                 = GIVES THE STRA LENGTH

Q LEY                                                 = GIVES THE CE LEVEL (OBSTRUCTION ETC)

Q LHEI (DRAFT)                                = GIVES THE TEXT LETTER HEIGHT

Q LSTU (ONLY FOR MEMBER)      = GIVES LEAVE SPEFN TUBE

Q LIST                                                = GIVES POSSIBLE TYPES IN MEMBERS LIST

Q LOCK                                             = GIVES THE LOCK STATUS

Q LSHAPE                                          = GIVES THE LABEL LEADER LINE STATUS

Q MATREF                                         = GIVES THE CE MATERIAL REF

Q   MCOUNT                                     = GIVES THE Nos OF SUB MEMBERS IN CE

Q MCOUNT SCTN                            = GIVES THE Nos OF SCTN MEMBERS IN CE

Q MDB                                               = GIVES THE  PROJECT DATABASE

Q MEM                                               = GIVES THE CE MEMBERS

Q MEML                                             = GIVES THE CE MEMBERS LINE

Q MIDP                                             = GIVES THE CE MIDPOINT CO-ORDINATES

Q MPT (DRAFT)                                = GIVES THE STRA MID POINT CO-ORDS

Q MTLL                                              = GIVES THE C.L. LENGTH OF MATERIAL TUBE

Q MTO                                               = GIVES THE CE MTO STATUS

Q NAM                                               = GIVES THE CE NAME

Q NCOF                                             = GIVES THE CE NET C OF G

Q NSRF                                              = GIVES THE CE NET SURFACE

Q NVOL                                             = GIVES THE CE NET VOLUME

Q NWEI                                              = GIVES THE CE NET WEIGHT

Q OBS                                                = GIVES THE CE OBSTRUCTION LEVEL

Q OLIST                                             = GIVES POSSIBLE TYPES OF OWNERS FOR CE

Q ORI                                                 = GIVES THE CE ORIENTATION (SLOPE)

Q OSRF                                              = GIVES THE SHEET OVERLAY (VIEW ONLY)

Q OWN                                              = GIVES THE CE OWNER

Q PA (PIPING)                                   = GIVES THE ARRIVE CO-ORDINATES

Q PA TOP WRT/* (PIPING)              = GIVES THE CE ARRIVE CO-ORDS AT T.O.PIPE

Q PA BOP WRT/* (PIPING)              = GIVES THE CE ARRIVE CO-ORDS AT B.O.PIPE

Q PARA                                              = GIVES THE CE PARAMETERS ie SERIAL SIZES

Q PH (PIPING)                                   = GIVES THE CE PIPE HEAD ATTRIBUTES

Q PH BORE (PIPING)                        = GIVES THE CE (PIPE HEAD) BORE

Q PH OD (PIPING)                            = GIVES THE CE (PIPE HEAD) DIAMETER

Q PI WRT/* (PIPING)                        = GIVES THE CE (PIPE SUPPORT) LOCATION

Q PKEY (DRAFT)                              = GIVES THE DIM PLINE NAMES

Q PL WRT/* (PIPING)                       = GIVES THE CE LEAVE CO-ORDINATES

Q PLNA                                              = GIVES THE CE PLINE NAMES

Q PLTXT (DRAFT)                            = GIVES THE PROJ TEXT ATTRIBUTES

Q POS                                                 = GIVES THE CE CO-ORDINATES (START)

Q POS WRT TO ID@                        = GIVES THE DIST FROM CE TO START OF

                                                                IDENTIFIED MEMBER.

Q PSPR (FOR BRAN/PIPE)               = GIVES PIPE SPEC. FOR CE BRANCH/PIPE

  

Q POS IN $V1                                   = GIVES THE CE DISTANCE TO VAR $V1

Q POS PIN1 WRT/*                           = GIVES THE CE CO-ORDINATION OF PIN1

Q POSE                                              = GIIIVES THE CE END COORDINATES

Q POS FITT                                        = GIVES THE C/FITT COODINATES (START)

Q POS  PLRF (DRAFT)                     = GIVES THE CURRENT VSEC COORDINATES.

Q POS IDPL@                                   = GIVES THE PLINE CO-ORDINATES AT CE START

Q POS PPLI BOS WRT/*                  = GIVES THE BOS PLINE (PPL1) AT (0,5 X DER LEN)

                                                               ON THE N/A

Q POSS                                              = GIVES THE CE START COORDINATES

Q POSS POSE                                    = GIVES THE CE BOTH END COORDINATES

Q PRLS                                               = GIVES THE DESP NAME TYPES

Q PRESS (FOR BRANCH/PIPE)       = GIVES THE CE PRESSURE

Q PT OD (PIPING)                             = GIVES THE CE (PIPE TAIL) DIAMETER

Q PT (PIPING)                                   = GIVES THE CE PIPE TAIL ATTRIBUTES

Q PURP                                              = GIVES THE STRU PURPOSE ATTRIBUTE

Q RAD (HVAC)                                  = GIVES THE CE RADIUS

Q RCOD (DRAFT)                             = GIVES THE VIEW ORIENTATION

Q REF                                                 = GIVES THE CE PDMS REFERENCE NO.

Q REPRES                                          = GIVES THE CE REPRESENTATION STATUS

Q FUNC                                             = GIVES THE FUNCTION

Q RRSF (DRAFT)                               = GIVES THE CURRENT VIEW RULE SETTINGS

Q SIZE (DRAFT)                                = GIVES THE VIEW O/ALLDIMENSIONS

Q SJUS                                               = GIVES THE PLOO JUSTIFICATION ie UTOP,

                                                               DCEN, DBOT

Q SNAP (DRAFT)                              = GIVES THE SNAP SETTING (ON/OFF)

Q SPRE                                               = GIVES THE CE SPECIFICATION REFERENCE

Q STEXT                                            = GIVES THE ATTA PENETRATION IDENT\

Q :STATUS                                         = GIVES THE CE STRU STATUS ie “AFC”

Q :SWCODE                                       = GIVES THE CE WEIGHT CODE

Q TCTL OR (Q CUTL)                       = GIVES THE CE CUT LENGTH?

Q THPOS (DRAFT)                            = GIVES THE C/VIEW MATCHLINE COORDINATES

Q TMRF (DRAFT)                              = GIVES THE CE (SYMBOL) NAME

Q TEMP (FOR BRANCH/PIPE )       = GIVES THE TEMPERATURE

Q TPOS (PIPING)                              = GIVES THE CE  PIPE TAIL COORDINATES

Q TPT (DRAFT)                                 = GIVES THE STRA TAIL POINT COORDINATES.

Q TULE                                               = GIVES THE BRANCH TUBE LENGTH

Q TYPE                                               = GIVES THE CE TYPE ie SCTN, PANE

Q UNIT                                               =  GIVES THE UNITS SETTING

Q USER                                              = GIVES THE CE USER DATABASE

Q USERMOD                                     = GIVES THE LAST USER LOGIN ID (STRU)

Q VOL CE                                          = GIVES THE CE VOLUME

Q VLIMITS (DRAFT)                        = GIVES   THE VIEW LIMITS

Q VSCALE (DRAFT)                         = GIVES THE C/VIEW SCALE (ie 0.5)

                                                                0.5 = 1:2      0.2 = 1:5          0.1 = 1:10        0.01 = 1:100

                                                              0.05 = 1:20       0.04 = 1:25                           0.02 = 1:50

Q VTYP (DRAFT)                              = GIVES THE VIEW ATT (ie.GLOBAL HIDDEN)

Q XYPOS (DRAFT)                           = GIVES THE VIEW POSITION ON SHEET

Q ZDIS                                                = GIVES THE CE FITTING DIST FROM START

$R6                                                      = GIVES THE MACRO LISTING FOR THE CURRENT

                                                               COMMAND

$R                                                        = EXIST THE CURRENT LISTED MACRO

beberapa command diatas ini adalah beberapa command yang ada dalam buku pdms command yang saya akan saya susun berdasarkan pengalaman, info dari internet, info dari kawan-kawan dan lain-lain.

bila berminat memilikinya, silah hubungi di  email pujanggapiping2012@gmail.com. Harga buku tersebut sekitar Rp. 75.000,- s/d Rp. 100.000,- .

Salam , 13 February 2012