ETANK2000 NEWS: TANK DRAFTING SOFTWARE ALMOST HERE

This email from friends who like to promote their product :


=============================================================




harset="windows-1252";
charset="windows-1252"
Sender: jsmitt@earthlink.net
Date: Wed, 11 Jan 2012 23:57:28 -0500

re-sending from my earthlink email...... (if you have replied to my email and I have not replied yet, please give me a day or two.  the response has been unbeleavable)


Dear Everyone,

I hope everyone has had a great holidays and New years!!!!!

This email is to let you know where we stand with ETank & AMETank.  Etank is the current storage tank design/re-rate software that we have been developing since 1993.  In 2011 we began developing a new program that does all of the engineering/code calculations that ETank does plus it will automatically create a 3D model and generate a complete set of fabrication drawings and bill of materials.  This new program is AMETank.  If you purchase Etank now, you will receive a free upgrade to the base version of AMETank when it is released in 3 or 4 weeks.

Etank2000 is our  current software that can be used to design or re-rate aboveground storage tanks to API-650, API-620, & API-653.  Etank can be used to design new tanks per API-650, API-620, or UL-142.  It can also be used to evaluate/re-rate existing tanks as part of a Mechanical Integrity Program or Tank Inspection Program in accordance with API-653.   Etank is the only software that includes both API-650 & API-620 plus API-653 so a wide variety of tanks can be designed using Etank.  Etank can also be used for Emergency Venting calculations per API-2000.  This versatility is very important and unmatched for an engineer involved in tank design or inspections.  Etank can be used by tank fabricators & erectors (both large & small tanks), Engineering/EPC companies, Petrochemical companies (for both designing new tanks and for evaluating existing tanks), and engineering consultants and NDT companies (involved with tank inspection or repair).

Etank Mobile User License       $1900.00
Extra Mobile User Licenses    $1000.00 each
Etank Network Version           $4950.00

Download Demo: http://www.etank.com/downloaddemo.html

Please reply to my email and I will send you more information, an official quote, and an Order Form.  I will also send you a brochure of both Etank and AMETank,


Since January 2011 we have been working with Technosoft (www.technosoft.com) to integrate Etank2000 with their 3D Modeling and drafting program, AMTank.  AMETank will perform all of the calculations that Etank2000 performs, but at the same time it will create a true 3D geometric model and then automatically generate a complete set of fabrication drawings and a bill of materials.  We are also working on adding the capability to create an estimate.  AMETank has its own drafting environment in which you can edit the drawings, but they also can be exported to AutoCAD or other CAD programs.  The 3D model can also be exported to 3D modeling programs like Inventor and for use with PDMS software.  AMETank includes details such as nozzles, manways, vents, ladders, spiral ladders, platforms, hatches, sumps with piping, flush type cleanouts, and many more.  We will also soon be adding new roof types such as truss supported conical roofs and structurally supported domed roofs.

***  Right now we are adding leg, skirt, & lug calculations to AMETank so when it is released you will be able to perform a complete design of API-620 tanks supported above ground.

AMETank has SI units built in for data entry, but it has something no other tank software will have.  AMETank has the actual SI formulas from API-650 built in, so the calculations will be performed in SI units and the report will have the SI formulas.  This means there is no rounding errors.  Other software lets you enter data in SI units, then converts the data to English units, performs the calculations in English units, then converts the results to SI units.  That results in DOUBLE Conversion Errors and makes the reports a mess of mixed units & formulas.  That will not be the case with AMETank.

The base version of AMETank will be the equivalent to Etank2000 in that it will do all of the calculations, but will not create the drawings or bill of materials.  If you purchase Etank now, you will receive a free upgrade to the base version of AMETank when it is released.  You will have to upgrade the full AMETANK in order to be able to generate the drawings and bill of materials.  Please click the link below to download the AMETank brochure.  All of the images and drawings in the brochure have been create using AMETank.

Within the next year we expect to have AMETank be able to create an estimate as you deisgn your tank.  We are also planning to add an FEA engine so that you will be able to run a Finite Element Analysis on the model you create.

AMETank Brochure:  http://www.ametank.com/ametankbrochure.pdf

There is also a video of AMETank being used to design a large storage tank on the Demonstration page, but that is supposed to be moved to its own "Video" page.  http://www.ametank.com

Because AMETank will have SI units and several new roof types that the competition does not have, the price for the base version of AMETank will increase from $1900 to $2500 (which is what the competition is already charging).  If you purchase ETank PRIOR TO the release of AMETank you will save $600 because you can still get Etank now for only $1900.  As an existing Etank customer you will then receive a free upgrade to the base version (Etank equivalent) of AMETank.  If you are interested in the drafting capabilities we can show you the full AMETank via an online live WebEx demonstration.  Please email me and I will provide more information and help set up the demonstration.

Etank Mobile User License       $1900.00
Extra Mobile User Licenses      $1000.00 
Etank Network Version           $4950.00

You can still download the Etank2000 demo program from the following link...

Download Demo: http://www.etank.com/downloaddemo.html


Please reply to my email and I will send you more information, an official quote, and an Order Form.


Thank you.

Jeffcoat


Jeffcoat Smitt (jeffcoat@etank.com or jsmitt@fteinc.com) 
President, E-Ware Inc. (www.etank.com) 
President, FTE Inc. (www.fteinc.com)

E-ware Inc./FTE Inc.
4611 Broad River Rd., Suite I
Columbia, SC 29210
Phone: (803) 750-9055
Fax: (888) 680-1861

========================================================================